Consultation with a specialist

About fans GDP(A)

Fans high pressured, one way air intake

Fans –blowing, high-pressured, centrifugal, one way air intake GDP (A) 280, GDP (A) 315 and GDP (A) 630 are designed for clean air as well as non aggressive gases with dry and non sticking dust transportation.

  коллаж1.jpg

Performance

up to 235 000 m3 / hour

Pressure

to 20.5 kPa


Efficiency

of the fans corresponds
to the best achievements in the field

85%

 
 

Fans are equipped with gas cleaning systems as well as technological installations for various industries, and they can also be used as a blow type fans or as primary air fans in stationary boilers of different capacities.

Вентилятор-без-фона.gif

Fans are installed after the gas purification systems. Enviromental temperature should be less than -30 ° C and not more than 200 ° C. Fans for different working conditions are available upon the customer’s request.

The design of the fan does not allow taking loads of intaking and outtaking and outlet ducts. Suction and blusting air ducts must be performed with installation of compensator next to the fans especially in case of thermal expansion of the duct.

 

вентилятор3_мал.gif

 

вентилятор1_мал2.gif

  500.gif  

вентилятор2_мал-1.gif

Series GDP(A) 280>> Series GDP(A) 315>> Series GDP(A) 500>> Series GDP(A) 630>>

podval1.jpg